Computers and Technology

How To Fix Error 79 On HP Printer?

Fix Error 79 On HP Printer

On rare occasions, your printer may display the Fix HP printer error 79. This is a service error that means a print job has become corrupted. This error could also indicate that your HP printer’s firmware has become out of date. As a result, your HP printer’s spooler may be unable to communicate with your device.

With these solutions, how can I resolve HP Service Error 79?

  • Your device’s network signals may be disrupted.
  • The hardware in your printers, such as the DIMMs and motherboard, may be damaged.
  • This error can be found as a result of a faulty wire connection.
  • Your device’s firmware may be out of date.
  • The page you’re printing could be from an unauthorised website or link. As a result, the issue may be arising.
  • Turning your device on and off several times may result in a 79 service error.
  • The error code will annoy you if the file you are printing is quite large.
  1. Error 79: turn off and then back on
  • Turn off the printer’s power.
  • Allow at least 30 seconds to pass.
  • Reconnect the power.
  • Wait for the printer to boot up.

If your HP printer displays error 79, it has likely experienced an internal firmware error.

Error 79 message remains on your printer’s display, disconnect any network or USB cables and power cycle the printer.

the printer returns to the Ready state, check the firmware version and update it if a newer version is available.

Print a Configuration Report from the printer’s control panel to find your printer’s firmware version, or go to the HP Support page to see if the latest firmware version is available.

If error 79 occurs again on your printer, try to trace it back to something in your environment.

Delete any print jobs from your computer, as well as any other computers connected to the printer, and then print a test page.

  1. Replace the DIMM

2.1 Detach and reinstall the DIMM

  • The printer is turned off.
  • After that, take out the DIMM.
  • Reinstall the DIMM to ensure it is properly seated in the printer.
  • Switch on the HP printer.

2.2 Discard or replace the DIMM

  • Remove any installed DIMMS.
  • Repeat the retest on your HP printer.
  • If your printer’s print quality is satisfactory, install a DIMM that is compatible with your printer
  1. Install the drivers again.
  • Type Control into the Windows Search bar to open the Control Panel.
  • Select Uninstall a programme to remove all HP printer-related software.
  • Remove the HP device by uninstalling it from the Print queues.
  • Restart your system and wait for the driver to install automatically.
  • Install the HP associated software again, and hopefully, that will be enough to solve the problem
  1. How Do I Fix HP 79 Error?

If you have an HP printer, you may occasionally encounter service errors such as the 79 error code. You can choose from several solutions to fix the HP printer error 79. These solutions will help you shut down and restart your HP printer. You can also try restarting the Print Spooler service, turning off and on your printer, and restarting the devices connected to it.

  1. Update the Firmware on Your HP Printer

You have three options for updating it. The manual method, the method of directly receiving updates from your printer, and the HP Smart App are all options. You can choose the most appropriate option based on the requirements for these options.

In this measure for the 79 service error, we recommend that you manually update the firmware of your HP printer if necessary.

  • Select “Network” by going to your HP printer’s “Screen” or “Control Panel.”

Also Check :

Whastapp screen recorder 

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button